LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Bumpers) >> 63 Bumpers >> Front Bumper >> Center Trim Molding, Removing And Installing >> Removing

Center Trim Molding, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the side air intake grille. Refer to FRONT BUMPER SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING .

-- Remove the center air intake grille. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING .

-- Release the retainers -A arrows-.

GWWA63-11522Courtesy of AUDI

-- Remove the trim molding -1- -arrow B-.