LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Bumpers) >> 63 Bumpers >> Front Bumper >> Bumper Cover, Removing And Installing >> Installing >> Depending on the version, the following additional work is required:

Depending on the version, the following additional work is required:

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Adjust the adaptive cruise control (ACC). Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .

-- Calibrate the Front Peripheral Camera -R243-. Refer to PERIPHERAL CAMERA, CALIBRATING .

-- Calibrate the Night Vision System Camera -R212-. Refer to NIGHT VISION SYSTEM CAMERA -R212-, REMOVING AND INSTALLING .

-- If the bumper cover is damaged or replaced, or there is paint work near the radar sensors, then calibrate the front corner radar. Refer to FRONT CORNER RADAR, CALIBRATING .

Tightening Specifications