Brake Caliper, Removing And Installing, RSQ8: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
CAUTION:
Health risk due to toxic dust from the brake system.
Irreversible deposit of dust particles in the lungs. Breathing impairments may occur.
- Never blow out the brake system with compressed air.
- Use only mineral spirits to clean the brake caliper.
-- Secure the brake hose -3- to the bracket.
-- Bring the connector -5- into its installed position and turn in the direction of -arrow- until the tab -2- engages in the opening -1- on the bracket.
-- Connect the connector -4-.
- Make sure the brake hose is routed correctly.
- Make sure the brake hose is not pinched, bent, twisted or rubbing against the vehicle.
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.