Mounting Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Disconnect the brake pedal from the brake booster. Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER .
Vehicles without High-Voltage System:
-- Remove the bolts -arrows-.
Vehicles with High-Voltage System:
-- Remove the bolts -arrows-.
-- Disconnect the connector -3- and free up the wire.
-- Remove the nuts -1-.
-- Remove the bolt -2-.
-- Remove the mounting bracket with the brake pedal and accelerator pedal module installed.
-- Remove the brake pedal. Refer to BRAKE PEDAL, REMOVING AND INSTALLING .
-- Remove the accelerator pedal module. Refer to ACCELERATOR PEDAL POSITION SENSORS -G79- / -G185-, REMOVING AND INSTALLING .