Mounting Bracket, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the accelerator pedal module. Refer to ACCELERATOR PEDAL POSITION SENSORS -G79- / -G185-, REMOVING AND INSTALLING .

-- Install the brake pedal. Refer to BRAKE PEDAL, REMOVING AND INSTALLING .

-- Bring the mounting bracket with the installed brake pedal and accelerator pedal module into the installation position.

The mounting bracket must be seated in the bulkhead guides and all stud bolts.

-- Tighten the mounting bracket -1 and 2-.

Courtesy of AUDI

-- Connect the brake pedal to the brake booster. Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER .

CAUTION:

Faulty brakes increase the risk of an accident.

- Make sure the brakes are working correctly before driving the vehicle for the first time.

-- Install the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .