LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Air Conditioning (Heating, Ventilation And Air Conditioning) (Actuators - Air Ionization)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Fresh Air Blower -V2- WITH Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING >> Installing

Fresh Air Blower -V2- WITH Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Check the air intake housing -C- via the shaft for the Fresh Air Blower -V2- -B- for contamination and clean if necessary.

-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake housing -C-.

scientia non olet · About LEMON Manuals