OVERVIEW - REAR DISPLAY CONTROL HEAD, "Mix" OR "High" A/C SYSTEM, Q7 BEFORE PRODUCT IMPROVEMENT
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- The following illustration shows the Rear A/C Display Control Head -E265-, is shown as it would be installed on a vehicle with a "Mid" or "Mix" A/C system and with the "seat heating" optional equipment. There are different versions of the Rear A/C Display Control Head -E265- with different allocations, pay attention to the correct allocation. Refer to the Parts Information.
- The following briefly discusses the different button functions for the adjustment of the rear vehicle interior air conditioning on the Rear A/C Display Control Head -E265-. An exact description of the different possibilities for the passenger compartment air conditioning via the settings on the Rear A/C Display Control Head -E265- can for example be found in the vehicle Owner's Manual. Refer to the Owner's Manual.
- Via the various settings on the Front A/C Display Control Head -E87- or for the vehicle (active child safety system for example) the Rear A/C Display Control Head -E265- switches off or the possibility to change the settings on the Rear A/C Display Control Head -E265- is locked via the buttons. Refer to the Owner's Manual.
- Right Rear Seat Heating Button
- Illuminated LED indicates the level selected.
- +
Button for Temperature Preset Warmer
- The temperature of the air to the rear vent is calculated via the settings on Rear A/C Display Control Head -E265- and the Front A/C Display Control Head -E87- from the Front A/C Display Control Head -E87- and is activated according to the characteristic curve.
- The set temperature will be shown in the display.
- Temperature Display
- The temperature set on the Rear A/C Display Control Head -E265- for the rear is displayed.
- For various settings in the vehicle (for example active child safety system) the display can be switched off or locked.
- -
Button for Temperature Preset Cooler
- The temperature of the air to the rear vent is calculated via the settings on Rear A/C Display Control Head -E265- and the Front A/C Display Control Head -E87- from the Front A/C Display Control Head -E87- and is activated according to the characteristic curve.
- The set temperature will be shown in the display.
- Left Rear Seat Heating Button
- Illuminated LED indicates the level selected.