Overview - Fragrance System

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Hose
Bracket for Fragrance System Functional Unit -GX43- and Air Freshening System Control Module -J1101-
- RHD: is a mirror image
Expanding Rivet
Bolt
- 3 Nm
Bolt
- Optional, (service solution if the locking mechanism on the bracket for the Fragrance System Functional Unit -GX43- is faulty). Refer to Parts Information
- Quantity: 2
- 1.1 Nm
Bolt
- 3 Nm
Container with Fragrance 2 --
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to 440.
Container with Fragrance 1 --
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to 440.
Fragrance Diffuser System Actuator -V687-
- Removing and Installing. Refer to Fragrance Diffuser System Actuator -V687-, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 1.1 Nm
Wiring Harness
Fragrance Diffuser System Temperature Sensor -G1056-
- Removing and Installing. Refer to Fragrance Diffuser System Temperature Sensor -G1056-, REMOVING AND INSTALLING .
Fragrance System Functional Unit -GX43-
- Removing and Installing. Refer to Fragrance System Functional Unit -GX43-, REMOVING AND INSTALLING .
Bolt
- Optional, (service solution, if the locking mechanism on the bracket for the Air Freshening System Control Module -J1101- with Fragrance Diffuser System Blower -V686- is faulty). Refer to the Parts Information.
- Quantity: 2
- 1.1 Nm
Air Freshening System Control Module -J1101- with Fragrance Diffuser System Blower -V686-
- They are one component and cannot be separated
- Removing and Installing. Refer to Air Freshening System Control Module -J1101- WITH Fragrance Diffuser System Blower -V686-, REMOVING AND INSTALLING .