Front Passenger Side Rear Ionizer -J1108-, REMOVING AND INSTALLING, Q7 BEFORE PRODUCT IMPROVEMENT: Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Ionization System Control Module Component Location Overview

Courtesy of AUDI OF AMERICA, LLC

Vehicles with High-Voltage System

-- Switch off (deactivate) the "parking air conditioner". Refer to Owner's Manual.

Continuation for all vehicles

-- Move the front passenger seat as far forward as possible.

-- Switch off the ignition.

-- Remove the upper trim of the right B-pillar. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connector -A-.

-- Remove the bolt -C-.

-- Turn the ionizer -D- 90° in the direction of the -arrow- and remove it from the mount of air duct -F-.