Fragrance Diffuser System Temperature Sensor -G1056-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the driver seat as far back as possible.
-- Switch off the ignition.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Release the fragrance container -2- in the direction of the -arrow- and remove.
-- Release and disconnect the connector -3-.
-- Turn the Fragrance Diffuser System Temperature Sensor -G1056- -4- 90° in the direction of the -arrow- and remove from the Fragrance System Functional Unit -GX43- -1-.