Fragrance Diffuser System Actuator -V687-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Check the wiring harness -3- for correct routing.

-- If the Fragrance Diffuser System Actuator -V687- -1- is replaced, perform the basic setting.

Procedure

-- Connect the Vehicle Diagnostic Tester .

-- Select the Diagnostic mode and start the diagnosis.

-- Select the Test plan tab.

-- Select the Select individual test button and select the following tree structure consecutively:

Diagnostic-capable systems
0009 - Electronic central electric - J519
0009 - Central electric electronic, functions
0009 - Basic setting for climate control functions
→ Basic setting 6, program the end stops for Fragrance Diffuser System Actuator -V687-