Vehicle Lift Mode, Activating

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Procedure:

-- Turn on the ignition and activate the MMI.

-- Select the MENU function button.

-- Select >>vehicle<<.

-- Press the left control button and follow the following menu structure:

Service & Checking

-- Select the function "Air spring: Changing wheel" with the MMI-control knob and set to "on".

NOTE:

Vehicle lifting mode automatically switches off again when vehicle speed exceeds 15 km/h (9.3 mph).

When the vehicle lift mode is activated for a longer time, the pressure in the suspension strut can lower and thereby also lower the vehicle level. If necessary, quickly start the engine to reactivate the vehicle lift mode.