Ignition Coils, Lubricating
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Silicone Paste :G 052 565 A1
Procedure:
-- Grease the seal tube -arrow- of the ignition coil all around with silicone paste. The bead must be 1 to 2 mm thick.
NOTE:
Refer to the Parts Information for silicone paste to be used.
New ignition coils are delivered already lubricated. It is not necessary to lubricate them again.
CAUTION:
Incorrect lubricant increases the risk of destroying the ignition coils.
- Only use the silicone paste approved here.