Rear Lid Control Module -J605-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the roof end strip. Refer to the appropriate Service Information. .
-- Disconnect the connectors -3 and 5-.
-- Release the catches -1 and 2- and at the same time push the control module -4- to the left side -arrow-. Doing so disengages the brackets from the guides.
-- Remove the Rear Lid Control Module -J605-.