LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Hood, Lids (Fy)) >> 55 Hood, Lids >> Rear Lid >> Hinges, Removing And Installing >> Removing

Hinges, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear lid side trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the headliner. Refer to HEADLINER, REMOVING AND INSTALLING .

-- Remove the rear lid motor. Refer to Rear Lid Drive Unit -VX69-, REMOVING AND INSTALLING .

-- Free up the wiring harness.

-- Remove the left and right gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Close the rear lid.

-- Remove the bolts -1 and 2- and nut -4-.

GWWA55-11178Courtesy of AUDI

-- Remove the hinge -3-.