LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Hood, Lids (Fy)) >> 55 Hood, Lids >> Hood >> Hook Release Lever, Removing And Installing >> Installing

Hook Release Lever, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Slide the clip all the way into the release lever.

-- Press the release lever on until it audibly engages.

scientia non olet · About LEMON Manuals