LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Communication) >> 91 Communication >> MULTIFUNCTION Steering Wheel >> Tiptronic Downshift Button -E480- /Tiptronic Upshift Button -E479-, REMOVING AND INSTALLING >> Removing

Tiptronic Downshift Button -E480- /Tiptronic Upshift Button -E479-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the corresponding multifunction button. Refer to Right Multifunction Buttons on Steering Wheel -E441- /Left Multifunction Buttons on Steering Wheel -E440-, REMOVING AND INSTALLING .

-- Remove the bolt -2- from the steering wheel -1-.

Fig 1: Identifying Screw From Steering Wheel, Removal
GWWA91-11652Courtesy of AUDI

-- Remove the Tiptronic switch -3- with the connecting wire toward the rear.