Front Information Display Control Head 2 -J1060-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the Switch Module in Instrument Panel, Center -EX22-. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN CENTER CONSOLE .
-- Release and disconnect the connectors from the Front Information Display Control Head 2 -J1060-.
-- Remove the nuts/bolts -arrows- and remove the Front Information Display Control Head 2 -J1060- with the frame -1- from the center console cover.