Near Field Communication Control Module 2 -J1170-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the center console cover. Refer to CENTER CONSOLE COVER, REMOVING AND INSTALLING .
The Near Field Communication Control Module 2 -J1170- -1- is clipped into the center console cover.
-- Press the retainers in direction of -arrows- outward.
-- Remove the Near Field Communication Control Module 2 -J1170- -1- from the center console cover -2-.
-- Release and disconnect the connectors -3-.