LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Communication) >> 91 Communication >> Antenna Systems >> Near Field Communication Antenna, Removing And Installing >> Removing

Near Field Communication Antenna, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the center speaker trim. Refer to OVERVIEW - INSTRUMENT PANEL .

-- Release the catches -2- for the Near Field Communication Antenna -R269- -1-.

Fig 1: Identifying Close Range Communication Antenna -R269-
GWWA91-12287Courtesy of AUDI

-- Tilt the Near Field Communication Antenna -R269- -1- in the direction of -arrow- out of the holder in the instrument panel.

-- Release and disconnect the connector -3- from the Near Field Communication Antenna -R269- -1-.

-- Remove the Near Field Communication Antenna -R269-.