Speaker Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the speaker trim.
- Proceed very carefully when removing and installing.
-- Carefully unclip the speaker trim -1- using the Pry Lever:80-200 in direction of -arrows- by sliding the wedge approximately 2 mm into the seam under the speaker trim.
-- Unclip the remaining speaker trim retainers along the seam and remove the trim.