Front Sill Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat all the way forward and up.
-- Free up the sill panel -1- in the door seal area.
-- Unclip the sill panel -1- from the side sill starting at the front using the Trim Removal Wedge:3409 in the direction of -arrow A-.
-- Release the retaining tab on the sill panel from B-pillar trim panel using the Wedge:T10383/1 in the direction of -arrow B-.
-- Use the Trim Removal Wedge:3409 to unclip the back of the sill panel from the side sill in the direction of -arrow C-.
-- Open the tab -2-, guide out the seat belt webbing and remove the sill panel -1-.