Rear Carpet, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Remove the bench seat / single seats. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Remove the outside belt end fittings. Refer to OUTER REAR BELT END FITTING, REMOVING AND INSTALLING .

-- Remove the footwell center console trim panels. Refer to FRONT FOOTWELL CENTER CONSOLE TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the front sill panel. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .

-- Remove the rear sill trim. Refer to REAR SILL PANEL, REMOVING AND INSTALLING .

-- Remove the luggage compartment floor bracket. Refer to SIDE LUGGAGE COMPARTMENT CARPET BRACKET, REMOVING AND INSTALLING, WITHOUT HIGH-VOLTAGE SYSTEM .

-- If equipped, loosen the bracket for the Voltage Converter, 48 V/12 V -A7- and Terminal 40 Wire Junction 2 -TV67- and move it to the side. Refer to VOLTAGE CONVERTER, 48 V/12 V -A7-, REMOVING AND INSTALLING .

-- Remove the floor mat -2-.

Courtesy of AUDI

-- Remove the plugs -3-.

-- Make sure the carpet does not tear at the openings.

-- Fold the carpet -1- and remove.