LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Trim Panels And Insulation) >> 70 Trim Panels And Insulation >> Luggage Compartment Trim Panels >> Lock Carrier Trim Panel, Removing And Installing >> Removing

Lock Carrier Trim Panel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA70-13060Courtesy of AUDI

-- Remove the luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING .

-- Free up the lock carrier trim panel -2- near the rear lid seal -1-.

-- Grip the trim panel -2- by hand and carefully pull vertically upward using a jerking motion in the direction of -arrow-.