Windshield Projection (Head-Up Display) Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damaging the trim.
- Proceed carefully when removing. The Wedge :T10383/1 must be positioned at the trim retainers.
-- Unclip the windshield projection trim -1- using the Wedge:T10383/1 in direction of -B arrows-.
-- To do so, position the Wedge :T10383/1 at the retainer -2- and slide it in direction of -arrow A- until the retainer disengages from the mount.
-- Unclip the rest of the retainers and remove the windshield projection trim -1- toward the rear.