Outer Speaker Trim, Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the speaker trim.
- Proceed very carefully when removing and installing.
-- Using the Wedge Set:T10383/1 , carefully unclip the speaker trim -1- along the seam in the direction of -arrow- by inserting the wedge approximately 2 mm into the seam under the speaker trim.
Installing
Install in the reverse order of removal while noting the following:
- Before installing, check all the fasteners for damage and replace if necessary.
Tightening Specifications
- Refer to OVERVIEW - INSTRUMENT PANEL