Center Speaker Trim, Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the speaker trim.
- Proceed very carefully when removing and installing.
-- Carefully unclip the speaker trim -1- using the Wedge Set:T10383/1 in the direction of -arrow A- by sliding the wedge approximately 2 mm in the seam under the speaker trim.
-- Unclip the remaining tabs for the speaker trim along the seam in the direction of -arrow B-.
-- If necessary, insert a long screwdriver forward under the speaker trim and unclip the front retaining pin.