LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Trim Panels And Insulation) >> 70 Trim Panels And Insulation >> Instrument Panel >> Outer Instrument Panel Vent, Removing And Installing >> Instrument Panel Vent, Removing And Installing, Driver Side >> Removing

Instrument Panel Vent, Removing And Installing, Driver Side: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA70-13018Courtesy of AUDI

-- Move the steering wheel toward the rear and up as far as possible.

-- Remove the light switch trim. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .

-- Remove the bolts -1-.

-- Unclip the instrument panel vent -2- with the scraper -A- in the direction of -arrow-.

-- Unclip the remaining retainers, remove the instrument panel vent -2- carefully while releasing and disconnecting the connectors.