LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Trim Panels And Insulation) >> 70 Trim Panels And Insulation >> Instrument Panel >> Outer Instrument Panel Vent, Removing And Installing >> Front Passenger Side Instrument Panel Vent, Removing And Installing >> Removing

Front Passenger Side Instrument Panel Vent, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA70-13028Courtesy of AUDI

-- Remove the instrument cluster trim. Refer to INSTRUMENT CLUSTER TRIM, REMOVING AND INSTALLING .

-- Remove the lower instrument panel decorative trim on the front passenger side. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING, LOWER FRONT PASSENGER SIDE .

-- If equipped, remove the Air Ionization System Control Module -J897-. Refer to COMPONENT LOCATION OVERVIEW - AIR IONIZATION .

TIP:

-- Take pictures of the wires to ensure correct installation.

-- Remove the bolts -2-.

-- Unclip the instrument panel vent -1- in the direction of -arrow-.

-- Carefully remove the instrument panel vent while releasing and disconnecting the connectors.