Midrange Speaker Trim, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Before installing, check all the fasteners for damage and replace if necessary.
-- When using a speaker trim that has already been welded, drill the screw holes to a 3.0 mm diameter and secure with screws -1-.
-- Insert the new speaker trim into the door trim panel and secure the plastic domes with lock washers -2-.