Component Location Overview - Seals (Excluding 0D7/0DY)

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Final Drive, Differential Seals (Excluding 0D7/0DY)

Courtesy of AUDI

Inner Flange Shaft Seal
- Replace after removing
- Refer to LEFT SEAL, REPLACING .
O-Ring
- Replace after removing
- Refer to OVERVIEW - FINAL DRIVE .
Front Final Drive Cover
- Refer to OVERVIEW - FINAL DRIVE .
Outer Flange Shaft Seal
- Replace after removing
- Refer to RIGHT SEAL, REPLACING .
Front Protective Pipe Seal
- Replace after removing
- Refer to SEALS ON PROTECTIVE PIPE, REPLACING, EXCLUDING 0D7/0DY
Protective Pipe
Rear Protective Pipe Seal
- Replace after removing
- Refer to SEALS ON PROTECTIVE PIPE, REPLACING, EXCLUDING 0D7/0DY
Self-Locking Center Differential Seal
- Replace after removing
- Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING
Self-Locking Center Differential Dust Protector
- Replace after removing
- Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING
Converter Housing Seal
- Replace after removing
- Refer to SEALS ON PROTECTIVE PIPE, REPLACING, EXCLUDING 0D7/0DY
Input Shaft Seal
- Replace after removing
- Refer to TORQUE CONVERTER SEAL, REMOVING AND INSTALLING
Input Shaft O-Ring
- Replace after removing
- Refer to OVERVIEW - TORQUE CONVERTER