Center Differential, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is installed.

-- Remove the driveshaft. Refer to DRIVESHAFT, REMOVING AND INSTALLING .

-- Drain the gear oil from the transfer case. Refer to GEAR OIL, DRAINING AND FILLING .

-- If equipped remove the vibration damper.

-- Remove the bolts from the center differential housing in the following sequence: -6 to 1-.

Fig 1: Center Differential Housing Bolts - Loosening And Tightening Sequence

Courtesy of AUDI

CAUTION:

Transmission Components Could Be Damaged.

- Carefully remove the center differential housing from the transmission toward the rear. Otherwise the center differential could fall out of the transmission.

-- Secure the center differential -1- so it does not fall out or remove it toward the rear from the input shaft.

Fig 2: Identifying Center Differential -1- At Input Shaft

Courtesy of AUDI