Potential Equalization Measurement
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
After installing the high-voltage components or potential equalization cables on the applicable high-voltage components a potential equalization measurement must be performed.
-- Connect the Vehicle Diagnostic Tester.
-- Select the ODIS service and start.
-- Select the tab special functions .
-- Select one after the other:
- High Voltage
- Potential Equalization Measurement
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.