Decoupler Actuator -V606-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- If the Decoupler Actuator -V606- is supposed to be replaced, the service mode must be activated.
The Vehicle Diagnostic Tester is connected.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Drivetrain
- Engine code
- 0001 - OBD-capable systems
- 0001 - Engine electronics J623
- 0001 - Engine electronics functions
- 0001 - Activate/deactivate the service mode
Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.