Selector Mechanism, Removing And Installing, Vehicles Without Selector Lever Boot: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Remove the center console cover. Refer to .
-- Remove the bolt -2-.
-- Remove the selector mechanism -1- in the direction of -arrow- from the center console insert until the connector is accessible.
-- Release and disconnect the connector -2-.
-- Remove the selector mechanism -1- with wiring harness -3-.