4. Display in Instrument Cluster, Checking

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Test step 4.1

Engine running, selector lever position "P" engaged, foot brake not pressed.

-- Press the release button -2- and move the selector lever in the direction of "D" or "R".

The following message must be displayed in the instrument cluster: "To select a position please press the foot brake and the locking button on the selector lever".

Test step 4.2

Engine running, selector lever position "P" engaged, foot brake pressed.

-- Do not press the release button -2- and move the selector lever in the direction of "D" or "R".

The following message must be displayed in the instrument cluster: "To select a position please press the foot brake and the locking button on the selector lever".

Test step 4.3

Engine running, selector lever position "M" engaged.

-- Press the "P" -3- button and at the same time the selector lever must be in "M" longer than 20 seconds (Not on tiptronic plus or tiptronic minus):

In the instrument cluster the following message must be displayed: "Bring the selector lever into the automatic position". Additionally there is a warning tone.