Selector Lever Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition switched off.
-- Remove the selector lever handle upper section -1- upward in direction of -arrows-.
-- Vehicles with selector lever boot, carefully lift the selector lever boot on the side in direction of -arrow- using :3409 .
-- Remove the bolt -2-.
-- Pull the selector lever handle lower section -1- upward.