Selector Lever Boot On Selector Lever Handle, Disconnecting And Assembling
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Separating
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Release the catches in direction of -arrows- and remove the selector lever boot -1- from the selector lever handle.
Assembling
-- Push the selector lever boot on the selector lever handle until it clicks into place.
- The tab -2- on the selector lever boot must engage in the opening -1- in the selector lever handle in direction of -arrow-.
-- Install the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .