Front Parking Lock Emergency Release Cable, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

-- Make sure that the distance between the emergency release cable -2- and lever -1- is maintained.

Dimension -a- = minimum 1 mm.
Dimension -b- = minimum 1 mm.

-- Attach the rear emergency release cable -2- to the front emergency release cable -1- from the top in direction of -arrow A-

Fig 1: Identifying Emergency Release Cable

Courtesy of AUDI OF AMERICA, LLC

-- Install the sleeve -3- until it engages in direction of -arrow B-.

CAUTION:

Make sure the sleeve fits securely.

-- If equipped, install the rear EGR cooler. Refer to the appropriate Exhaust System article .

-- Install tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Check the parking lock emergency release. Refer to EMERGENCY RELEASE FROM P .