Tunnel CROSSMEMBER, Removing And Installing, Vehicles With 3.0L TDI Engine: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the parking lock emergency release cable. Refer to FRONT PARKING LOCK EMERGENCY RELEASE CABLE, REMOVING AND INSTALLING .
-- If equipped, install the bracket for the NOx Sensor Control Module 2 -J881- and Particulate Sensor -G784-. Refer to the approrpiate Service Information .