LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Controls, Housing (8-Speed Automatic Transmission 0D5)) >> 37 Controls, Housing >> ATF Circuit >> ATF Lines, Removing And Installing >> ATF Lines, Removing And Installing, AUDI Q7 From Product Improvement, AUDI Q8 >> Cleaning

ATF Lines, Removing And Installing, AUDI Q7 From Product Improvement, AUDI Q8: Cleaning

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Before installing a replacement transmission, always clean out the ATF cooler and ATF lines using compressed air (maximum 10 bar (145.03 psi)).

-- Place the :SMN372500  under the transmission.

NOTE:

If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.

Tightening Specifications

scientia non olet · About LEMON Manuals