Overview - Lock Carrier
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Radiator Mount
- Only for 8-cylinder TDI engine
- Bolt
- 8 Nm
- Mount
- For headlamp
- Removing and installing. Refer to HEADLAMP, REMOVING AND INSTALLING .
- Mounting Bracket with Release Cable
- For the hook release lever
- Overview. Refer to OVERVIEW - RELEASE CABLE .
- Bolt
- Quantity: 2
- Tightening specification. Refer to OVERVIEW - RELEASE CABLE .
- Lock Carrier
- There are different versions. Refer to the appropriate Parts Information.
- Removing and Installing. Refer to LOCK CARRIER, REMOVING AND INSTALLING .
- Reinforcement Brace
- Removing and Installing. Refer to REINFORCEMENT BRACE, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Bolt
- 10 Nm
- Quantity: 2
- Body
- Subframe
- Bolt
- 10 Nm
- Quantity: 4
- Lower Longitudinal Member
- Removing and Installing. Refer to LOWER LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
- Bracket
- For the lower longitudinal member
- Removing and Installing. Refer to LOWER LONGITUDINAL MEMBER BRACKET, REMOVING AND INSTALLING .
- Bolt
- 25 Nm
- Bracket
- For the lower longitudinal member
- Removing and Installing. Refer to LOWER LONGITUDINAL MEMBER BRACKET, REMOVING AND INSTALLING .
- Bolt
- 23 Nm
- Quantity: 2