Brake Rotor, Removing And Installing, Ceramic Brakes, RSQ8: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Installation in reverse order of removal and note the following:
TIP:
- Clean bolts before reusing.
- Replace damaged bolts.
- Always replace self-locking bolts.
-- Before reusing ceramic brake rotors check for wear (refer to Determining Wear on Ceramic Brakes: ) and damage (refer to Ceramic Brakes: ).
- When installing brake rotors, pay attention to the arrow showing the direction of travel and to the left and right installed location.
-- Thoroughly clean the brake rotor and hub contact surfaces and clear them of corrosion.
-- Do not tilt the brake rotor when mounting it on the wheel hub.
-- Tighten the bolt -1-.
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.
-- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.