Brake System Pressure Reservoir -VX70-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.

-- Pre-bleed the new Brake System Pressure Reservoir -VX70- before installing. Refer to Brake System Pressure Reservoir -VX70-, PRE-BLEEDING .

-- Remove the :VAG1869/2 .

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, BLEEDING .

TIP:

Remove all cloths from the vehicle that were previously placed down.

CAUTION:

Faulty brakes increase the risk of an accident.

- Make sure the brakes are working correctly before driving the vehicle for the first time.

- Make sure the brake lamp functions correctly.