Technical Data, Brakes
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Brake System
| Components |
Version |
| Brake circuit distribution |
Dual-circuit brake system with allocation in pairs: left and right front, left and right rear. |
| Brake Master Cylinder |
Tandem brake master cylinder |
| Brake booster |
Vehicles without a high-voltage system |
Vacuum brake booster |
| Vehicles with a high-voltage system |
Electric Brake Booster -NX6- with Brake System Pressure Reservoir -VX70- |
| Brake pressure regulator |
Via ABS Control Module -J104- |
Front Brakes
| PR Number |
|
1LN, 1LP, 1ZT, 1LK (18" Brakes) |
| Brake Rotor |
Diameter in mm |
375 |
| New thickness |
mm |
36 |
| Wear limit |
mm |
34 |
- The maximum lateral run-out for steel brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
| PR Number |
|
1ZC, 1ZD, 1ZY, 1LF (19" Brakes) |
| Brake Rotor |
Diameter in mm |
400 |
| New thickness |
mm |
38 |
| Wear limit |
mm |
36 |
- The maximum lateral run-out for steel brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
| PR Number |
|
1ZG, 1ZR (20"-Brakes) |
| Brake Rotor |
Diameter in mm |
420 |
| New thickness |
mm |
40 |
| Wear limit |
mm |
38 |
- The maximum lateral run-out for steel brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
| PR Number |
|
1LT (20"-Ceramic Brakes) |
| Brake Rotor |
Diameter in mm |
420 |
| New thickness |
mm |
40 |
| Wear limit |
mm |
Refer to Determining Wear on Ceramic Brakes: |
- The maximum lateral run-out for ceramic brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
| PR Number |
|
1LC, 1LI, 1ZH (21"-Ceramic Brakes) |
| Brake Rotor |
Diameter in mm |
440 |
| New thickness |
mm |
40 |
| Wear limit |
mm |
Refer to Determining Wear on Ceramic Brakes: |
- The maximum lateral run-out for ceramic brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
Rear Brakes
| PR Number |
|
1KD, 1KQ, 1KU, 1KW, 2EA (18" Brakes) |
| Brake Rotor |
Diameter in mm |
350 |
| New thickness |
mm |
28 |
| Wear limit |
mm |
26 |
- The maximum lateral run-out for ceramic brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
| PR Number |
|
1KK, 1KV, 1KU, 1KX (19"-Brakes) |
| Brake Rotor |
Diameter in mm |
370 |
| New thickness |
mm |
30 |
| Wear limit |
mm |
28 |
- The maximum lateral run-out for ceramic brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
| PR Number |
|
1KS, 1KZ, 2EG, 2EN (19"-Ceramic Brakes) |
| Brake Rotor |
Diameter in mm |
370 |
| New thickness |
mm |
30 |
| Wear limit |
mm |
Determining Wear on Ceramic Brakes: |
- The maximum lateral run-out for ceramic brake rotors is 0.06 mm.
- Measurement is performed with the brake rotor installed.
- Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.