Carbon-Ceramic Brake Wear Tester:VAS6813, CHECKING
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
"Before" measuring, the Carbon-Ceramic Brake Wear Tester:VAS6813 must be checked using the measurement plate provided.
Measurement Plate:
-- Place the measuring device in both openings of the measurement plate, -arrows- so that the laser beam points under the mark with the attached reference value.
-- Switch on the measuring device.
The value displayed on the display must correspond to the reference value attached to the measurement plate.
TIP:
- If the difference to the reference value is more than ± 2.0 units the measuring device must be recalibrated by a specialist company.
- For more information refer to the supplied Service Information.