Camshaft Position Sensor, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Camshaft Position Sensor -G40- Cylinder Bank 1 (right):
-- Remove the right rear coolant pipes from the longitudinal member. Refer to RIGHT REAR COOLANT PIPES ON LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
Continuation for all:
All additional procedures are described under: CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .