LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Ignition/Glow Plug System (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 28 Ignition/Glow Plug System >> Ignition System >> Camshaft Position Sensor, Removing And Installing >> Camshaft Position Sensor -G40-, REMOVING AND INSTALLING >> Installing

Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING, AUDI Q7/Q8 .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals