LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Turbocharger, Supercharger (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 21 Turbocharger, Supercharger >> Turbocharger >> Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING >> Installing

Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Press the control rod onto the ball pin until it engages audibly.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals