Central Locking -Safe- Indicator Lamp -K133-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
TIP:
The new Central Locking -Safe- Indicator Lamp -K133- must be connected with the door trim panel wiring harness.
-- Disconnect the wire and connect it with the new wire for the Central Locking -SAFE- Indicator Lamp -K133-. Refer to WIRING HARNESSES, REPAIRING .